• A new turbo mounting bracket has been implemented with the mounting bolt spacers incorporated into the …
Category: 2004 6.0L Power Stroke
• The turbo mounting joints have been modified. The mounting bolts no longer need spacers on the new turbo.
• Coolant flows out of the filter base and into the EGR cooler through a tube that directs the coolant to the back of …
• With exception to the exhaust up-pipe connection, the updated 2004 EGR cooler installs in the same location as the original EGR…
• Because the new EGR cooler is longer than the original, the exhaust up-pipe is shorter in length at the EGR cooler connection…
• The EGR cooler has been lengthened for the updated 2004 MY engine. • The changes to the EGR cooler will cause the exhaust gases…
• Three fins have been added to the turbine wheel of the turbocharger. • These additional fins were added to the turbine wheel in order…
• The intake manifold is now equipped with an EGR throttle plate. • The purpose of this plate is to lower the manifold pressure which…
• The intake manifold has been modified for the updated 2004 MY. • The cross over section at the rear of the manifold has been…
• The crankcase breather was externally mounted on the valve cover because of the redesign of the high-pressure oil rail.