Table of Contents Remove Remove TOC Loosen the lubricating oil transfer tube mounting capscrew. Remove the lubricating oil transfer connection mounting capscrews. Remove the lubricating…

Table of Contents Remove Remove TOC Remove the lubricating oil suction tube capscrews, suction tube, and o-ring. Discard the o-ring. SMALL | MEDIUM | LARGE Last Modified:  11-Jun-2010 Feedback /…

Table of Contents Remove Remove TOC NOTE: The sealant on the front and rear T-joints must not be removed by pulling down on the gasket. Doing…

Table of Contents Remove Remove TOC There are two identical cam follower assemblies, one for cylinders 1 through 3, and one for cylinders 4 through…

Table of Contents Remove Remove TOC  WARNING  This component or assembly weighs greater than 23 kg [50 lb]. To prevent serious personal injury, be sure…

Table of Contents Remove Remove TOC Remove the hydrocarbon doser fuel supply line p-clip capscrew from the water manifold body. Remove the four capscrews from…

Table of Contents Remove Remove TOC Remove the two fuel pump mounting brackets by removing the capscrews connecting the brackets to the cylinder block and…

Table of Contents Remove Remove TOC Remove the three capscrews that hold the gear pump to the fuel pump. Remove the gear pump from the…

Table of Contents Remove   Wabco Remove TOC Wabco Remove the air compressor support bracket and capscrews. Remove the two mounting nuts and the air…

Table of Contents Remove Remove TOC  CAUTION  Removal of the oil fill tube without loosening the tube brace capscrew is likely to cause fill tube…