1. Clean the oil pan gasket mating surface of the block and oil pan. NOTE: Mopar® Engine RTV must be applied to the 4 T-joints,…

1. Disconnect the negative battery cable. 2. Install engine support fixture # 8534. Do not raise engine at this time. 3. For 2WD vehicles, Remove…

1. Lightly lubricate oil filter gasket (2) with engine oil. 2. Thread filter (3) onto adapter nipple. When gasket makes contact with sealing surface, hand…

All engines are equipped with a high quality full-flow, disposable type oil filter. DaimlerChrysler Corporation recommends a Mopar® or equivalent oil filter be used. 1.…

ENGINE OIL SERVICE The engine oil level indicator is located at the left hand of the engine on the S.7L engines. CRANKCASE OIL LEVEL INSPECTION…

CHECKING ENGINE OIL PRESSURE 1. Remove oil pressure sending unit and install gauge assembly C-3292. CAUTION: If oil pressure is 0 at idle, do not…

NOTE: Threadlocking compound must be applied to the bolts before installation. 1. Install the bolts (2) that attach the transmission mount to the transmission bracket.…

1. Raise the vehicle on a hoist. 2. Using a suitable jack. support transmission. 3. Remove the fasteners from the transmission mount (1 ). 4.…

2WD 1. Install insulator (2) on the engine. NOTE: For mount to engine block and left engine bracket to front axle bolts, apply Mopar® Lock…