The exhaust manifolds are log style with a patented flow enhancing design to maximize performance. The exhaust manifolds are made of high silicon molybdenum cast…

1. Install intake manifold seals. 2. Position intake manifold and IAFM. 3. Install intake manifold retaining bolts, and tighten in sequence from the middle bolts…

1. Inspect the intake sealing surface for cracks, nicks and distortion. 2. Inspect the intake manifold vacuum hose fittings for looseness or blockage. 3. Inspect…

NOTE: There is NO approved repair procedure for the intake manifold. If severe damage is found during inspection, the intake manifold must be replaced. Before…

1. Disconnect negative cable from battery. 2. Remove resonator assembly and air inlet hose. 3. Disconnect electrical connectors for the following components: • Manifold Absolute…

The intake manifold is made of a composite material and features long runners which maximizes low end torque. The intake manifold uses single plane sealing…

1. Position the oil pump onto the crankshaft and install the 4 oil pump retaining bolts. 2. Tighten the oil pump retaining bolts to 28…

CAUTION: Oil pump pressure relief valve and spring should not be removed from the oil pump. If these components are disassembled and or removed from…

1. Wash all parts in a suitable solvent.  

1. Remove the oil pan and pick-up tube (Refer to 9 – ENGINE/LUBRICATION/OIL PAN – REMOVAL). 2. Remove the timing chain cover (Refer to 9…