Clean all surfaces of cylinder block and cylinder heads. Clean cylinder block front and rear gasket surfaces using a suitable solvent.

1. Perform the Fuel System Pressure Release procedure (Refer to 14 – FUEL SYSTEM/FUEL DELIVERY –                   …

CYLINDER HEAD GASKET FAILURE A cylinder head gasket leak can be located between adjacent cylinders or between a cylinder and the adjacent water jacket. •…

1. Position housing assembly (1) into 4 locating pins (2). 2. Connect air duct (2) at air cleaner cover (3) and tighten clamp (1).  

1. Loosen clamp (1) and disconnect air duct (2) at air cleaner cover (3). 2. Lift entire housing (1) assembly from 4 locating pins (2).…

1. Install filter element into housing. 2. Position housing cover (3) into housing locating tabs. 3. Pry up 4 spring clips (5) and lock cover…

1. Loosen clamp (1) and disconnect air duct {2} at air cleaner cover (3). 2. Pry over 4 spring clips (5) from housing cover (3).…

The Multiple Displacement System (MOS) provides cylinder deactivation during steady-speed, low-acceleration and shallow grade climbing conditions to increase fuel economy. MDS can provide a 5·20…