If the multimeter indicates resistance greater than 100k ohms with the keys witch in the START position: • Turn the keys witch to the OFF…

Remove the cable connecting the magnetic switch to the starter motor solenoid from the magnetic switch terminal. Connect the leads of the digital multimeter, Part…

Inspect the battery terminals for loose, broken, or corroded connections. Repair or replace broken cables or terminals. If the connections are corroded , remove the…

If conventional batteries are used, remove the cell caps or covers, and check the electrolyte level. NOTE: Maintenance-free batteries are sealed and do not require…

Install the alternator pulley, mounting fastener, and any washers and/or spacers. Hold the shaft or pulley to prevent turning. Tighten alternator pulley mounting fastener.  

Hold the shaft or pulley to prevent turning. Remove the alternator pulley.  

Spool Mount: Install the upper alternator bracket and mounting capscrews. Tighten the upper and lower alternator bracket mounting capscrew. NOTE: On some applications, the lower…

Use steam or solvent to clean the alternator brackets. Dry with compressed air. Inspect the alternator brackets for cracks or damage. If any cracks are…

Spool Mount: Remove the upper alternator bracket mounting capscrews. Remove the alternator bracket. NOTE: On some applications, the lower alternator bracket and water inlet are…

Check that the pulley is in line with the other belt-driven pulleys. Use pulley alignment fixture, Part Number 3163524, to check the alignment. If the…