Apply a coat of anti-seize compound on the threads of the v-band clamps and Torca® clamps. The aftertreatment outlet section contains a differential pressure sensor…

Install the exhaust gas temperature sensor in the boss on the inlet and/or outlet. Refer to Procedure 019-449 (Aftertreatment Exhaust Gas Temperature Sensor) in the…

Inspect the aftertreatment inlet and outlet canisters for cracks or other damage. Inspect the exhaust gas temperature sensor boss threads for damage, if the sensor…

Remove the exhaust gas temperature sensor from the boss in the inlet and/or outlet, if necessary. Refer to Procedure 019-449(Aftertreatment Exhaust Gas Temperature Sensor) in…

In some applications, the aftertreatment diesel oxidation catalyst is integrated into the aftertreatment inlet. Refer to Procedure 011-046 (Aftertreatment Diesel Particulate Filter Differential Pressure Sensor…

Due to the number of various exhaust aftertreatment applications, this procedure has been written to be generic. Illustrations within this procedure will not represent all…

Component • Use the following procedure to install the aftertreatment inlet or outlet sections. Refer to Procedure 011-048 in             Section…

• Use the following procedure to remove the aftertreatment inlet or outlet sections. Refer to Procedure 011-048 in         Section 11 . •…

System • Remove the v-band from the inlet, and the TorcaTM clamp from the outlet of the aftertreatment system. Refer to Procedure 011-048 in Section…

Due to the number of exhaust aftertreatment applications, this procedure has been written to be generic. Illustrations within this procedure will not represent all applications.…