Install Prior to installing the accessory drive, identify which style of gasket is going to be installed so that, if necessary, the gasket can be…

Install Prior to installing the accessory drive cover, identify which style of gasket is going to be installed so that, if necessary, the gasket can…

Initial Check Rear Gear Train NOTE: If oil supply to the accessory drive is not required and the gasket does not have oil passages, this…

General Information The air discharge line is supplied and connected directly to the engine’s air compressor by the vehicles OEM. For some applications, a noise…

Install Install the ai r compressor inlet tube. Connect the inlet tube to the air intake connection and then to the air compressor cylinder head.…

Install Install the air compressor coolant supply line. For the ai r compressor coolant supply line, connect the line to the cylinder block and then…

General Information Cummins® engines are equipped with a variety of air compressors, including a two cylinder version. This procedure will cover the removal, cleaning ,…

Measure Use an inside micrometer or a vernier caliper to measure the distance from the starting motor mounting flange to the forward face of the…

Install NOTE: Some flexplates require mounting plates and/or clamp rings. It will be necessary to install any mounting plates and/or clamp rings prior to or…

Install Install two M12 x 1.25 x 90-mm guide pins into the crankshaft flange 180 degrees apart. NOTE: If a clutch is used in the…