Install Apply a film of pipe sealant, Part Number 3375066 or equivalent, to the threads. Install the cylinder head adapter into the cylinder head. Torque…

Install Install the EGR cooler bracket and capscrew to the cylinder head. Tighten the capscrews in the order shown. Torque Value: 24 N•m [ 212…

Install Rocker Lever Cover Mounted Crankcase Breather If the gasket was removed, install the gasket into the rocker lever cover groove, starting with the tab…

Install Prior to installing the crankcase breather tube, apply clean 15W-40 engine oil to the o-rings located on the crankcase breather tube. Install the crankcase…

Install Rear Engine Mounted Crankcase Breather NOTE: If the gasket has been removed from the rocker lever cover, a new gasket must be used. If…

Install Rocker Lever Cover Mounted Crankcase Breather NOTE: A new rocker lever housing gasket must be used when the rocker lever housing is removed. Install…

Adjust Engine coolant temperature must be less than 60°C [140° F] Use the barring tool, Part Number 3824591, to rotate the crankshaft until the number…

Install Install the rocker lever assemblies and pedestals in their original position. Install the pedestal mounting capscrews. Tighten the pedestal mounting capscrews. Torque Value: 36…

Install Install the push rods into the sockets of the valve tappets. Lubricate the push rod sockets with clean 15W-40 engine oil.  

Install NOTE: The crosshead has a round hole and an oval hole. If installing new crossheads, it is not required to place the holes in…