NOTE: Some flex plates require mounting plates and/or clamp rings. It will be necessary to install any mounting plates and/or clamp rings prior to or…

Inspect the teeth of the ring gear for chips or uneven wear. Check the flex plate for cracks or other damage. Replace the flex plate…

Remove the flex plate cap screws and flex plate. NOTE: Some flex plates require mounting plates and/or adapters. It will be necessary to remove any…

For automotive and industrial applications, inspect the flex plate ring gear teeth for damage. If the flex plate ring gear is damaged make sure to…

Install the support bracket and mounting cap screws. Torque Value: 77 N•m [ 57 ft-lb ] NOTE: Make sure to install any shims or spacers…

Use steam or solvent to clean the rear engine support. Dry with compressed air. Inspect the support bracket for cracks or other damage. If the…

Use a hoist or lifting fixture to support the rear of the engine. NOTE: When removing the rear engine mount fasteners, note the location of…

Inspect all rubber-cushioned mounts for cracks or other damage. Inspect all mounting brackets for cracks or damaged bolt holes. Replace any damaged parts as necessary.…

For Front Mount, install the front mount bracket and cap screws. For Side Mount, install the side mount brackets and cap screws. Non Cummins® Engine…

Use steam or solvent to clean the front engine support bracket(s). Dry with compressed air. Inspect the engine support bracket for cracks or other damage.…