Remove the suction tube mounting capscrews. Remove the suction tube.  

Oil Pan, Suspended NOTE: A suspended oil pan consists of the oil pan, mounting flange, and a flexible gasket. Remove the oil pan mounting capscrews,…

Remove the two injector hold-down capscrews and remove the injector hold-down clamp. Use injector remover, Part Number 3823024, to remove the injector from the cylinder…

Remove the fuel connector retaining nut. Install the fuel connector remover, Part Number 3164025. NOTE: When removing the fuel connector from the cylinder head, care…

Remove the cylinder head gasket.  

Remove the cylinder head capscrews and cylinder head.  

If equipped, remove the exhaust manifold mounting capscrew lockplates. Remove the twelve exhaust manifold mounting capscrews and spacers. Remove the exhaust manifold. Cover open points…

Remove the four turbocharger mounting nuts. Remove the turbocharger and gasket. Cover the turbocharger exhaust inlet port with a protective cap from the Air Handling…

Remove the lubricating oil cooler housing capscrews, housing, gaskets, and cooler element.

Clean around the area where the oil drain line inserts into the cylinder block with a clean cloth. Remove the two capscrews that hold the…