Front Gear Train Mark the location of all clips and routing of the fuel drain lines to ensure they are replaced in the correct location…

Disconnect the two crankcase ventilation oil drain tube connections from the rocker lever cover. Disconnect the crankcase ventilation oil drain tube connection from the cylinder…

Disconnect the crankcase ventilation filter oil drain tube from the crankcase ventilation filter housing. Remove the crankcase ventilation filter oil drain tube from the cylinder…

Rear Engine Mounted Crankcase Breather Remove the closed crankcase ventilation valve mounting capscrews. Disconnect the hose connection between the crankcase ventilation filter housing and the…

Rocker Lever Cover Mounted Crankcase Breather Remove any fasteners securing the closed crankcase ventilation hose(s) to the engine. Remove the hose clamps. Remove the closed…

If equipped, remove any lubricating oil fill tube supports, clamps, and/or mounting capscrews. Remove the lubricating oil fill tube.  

General Information Due to the number of dipstick tube options, the following procedure has been generalized to cover common dipstick tube procedures. The illustrations may…

Remove the three capscrews holding the ECM mounting plate to the cylinder block. NOTE: Do not lose the vibration isolators while removing the capscrews. NOTE:…

Initial Check Use gauge, Part Number 3824564, and magnetic base, Part Number 3377399, to measure the lubricating oil pump driven gear backlash. If the backlash…

Remove the front gear cover mounting capscrews. Remove the front gear cover. Front Gear Train Remove the front gear cover mounting capscrews. Remove the front…