Use bushing mandrel, Part No. ST-1158, to push the new bushings into the oil pump body and cover. NOTE: The bushings must be installed level…

Visually inspect the bushing bore in the oil pump body and the cover for damage. Measure the inside diameter of the bushing bore in the…

Use bushing mandrel, Part No. ST-1158, to remove the worn or damaged bushings from the oil pump body and the cover.

Use clean 15W-40 oil to lubricate the drive shaft. Install the drive shaft, from the gear pocket side of the oil pump body, into the…

Visually inspect the cover and gear pockets in the body for scratches or other damage. If the marks on the cover or in the body…

Clean the gasket material from the lubricating oil pump body and the cover. Use solvent to clean the lubricating oil pump parts. Dry with compressed…

Remove the main oil pressure regulator as follows: 1. Remove the capscrew (1) and the retainer plug (2). 2. Remove the spring (3) and the…

Turn the main drive gear by hand to check the internal gears for freedom of rotation. Visually inspect the gears for cracked or broken teeth.…

Remove the cover and the gasket from the power steering pump mounting flange. Use a gasket scraper to remove the gasket material from the gasket…

While the engine is installed in chassis, install the dipstick in the dipstick tube housing. Use clean 15W-40 oil to fill the oil pan to…