• Remove the bolts, loosen the clamp securing the air hose and turbocharger and remove the air hose. • Turn the compressor wheel by turning…

• Inspect the turbocharger visually. If there is any trace of gas leakage or cracks, replace the turbocharger. (See “TURBOCHARGER”.) • Check for looseness in…

• Inspect the exhaust manifold visually. If there is any trace of gas leakage or cracks, replace the exhaust manifold. (See “EXHAUST MANIFOLD”.) • Check…

• Check for looseness in the intake manifold and air inlet pipe mounting bolts and nuts. If there is looseness, tighten the bolts and nuts…

[Cleaning] • Blow a jet of compressed air at a pressure not higher than 685 kPa {7 kgf/cm2} against the inside surfaces of the element.…

1.1 Preparation • Remove the safety plug from the high voltage battery box while referring to Gr18 HEV System. (Be sure to observe the regulations…

5.1 Overview • The diesel particulate filter regeneration control system burns and removes the particulate matter (PM) in the ceramic filter using high temperature exhaust…

4.1 Overview • The exhaust shutter is used for controlling the diesel particulate filter regeneration and facilitating the warming up of the exhaust brake. 4.2…

3.1 General description • In the turbocharger control system, various engine-related information (engine speed, coolant temperature, accelerator position) and driving status are collected by the…