• The air cleaner is a single element type. • When the engine slows down below the predetermined speed, the level of vacuum in the…

Inspection procedure Inspection: Pressure cap (1) Pressure cap valve opening pressure • Replace the pressure cap if the measured value deviates from the standard value…

Inspection and cleaning procedure •Inspection: Automatic cooling fan coupling Make an inspection of the following points. Replace the automatic cooling fan coupling if defective. Check…

Inspection procedure Inspection: Air leakage from radiator • Connect a hose and radiator cap tester to the upper tank. • Plug the lower tank and…

Installation procedure •Installation: Upper radiator hose Connect the upper radiator hose with its marking opposed to the buildup of the radiator. •Installation: Water hose Connect…

• Presence of air or exhaust gas in coolant accelerates corrosion of the cooling system components. To prevent this, carry out air/ gas leakage tests…

• With the pressure cap removed and the coolant temperature at 90°C, let the engine idle in order to bleed air completely out of the…

• Using the radiator for extended periods of time without cleaning can increase chance of rust and scale formation, which may cause engine overheating. The…

• Visually check the belts for possible cracks and damage. • If any faults are found, replace the belts.