Tools Required • J 41089 Injection Pump Wrench • J29872-A Injection Pump Adjustment Tool This procedure should be used after an injection pump installation or…

Removal Procedure Tools Required J 41089 Injection Pump Wrench 1. Remove the negative battery cables. 2. Remove the intake manifold. Refer to Intake Manifold Removal.…

Materials Fuel Lines – These are welded steel tubes, meeting GM Specifications 124-M, or its equivalent. Do not use copper or aluminum tubing to replace…

Removal Procedure Caution: To reduce the risk o f fire and personal injury that may result from a fuel leak, always replace O-ring seals exposed…

Removal Procedure Tools Required J 36608 Fuel Sender Tool 1. Remove the fuel tank filler cap. Caution: Refer to Battery Disconnect Caution in Cautions and…

Removal Procedure Tools Required J 36608 Fuel Sender Tool 1. Disconnect negative battery cables. 2. Drain the fuel from the tank. Refer to Fuel Tank…

Removal Procedure Tools Required J 36608 Fuel Sender Tool 1. Disconnect the negative battery cables. 2. Drain the fuel from the tank. Refer to Fuel…

Removal Procedure Tools Required J 36608 Fuel Sender Tool 1. Disconnect negative battery cables. 2. Drain the fuel from the tank. Refer to Fuel Tank…

Removal Procedure Tools Required J 36608 Fuel Sender Tool 1. Remove negative battery cables. 2. Drain the fuel from the tank. Refer to Fuel Tank…

Removal Procedure Tools Required J 36608 Fuel Sender Tool Caution: Before servicing any electrical component, the Ignition key must be In the OFF or LOCK…