Removal Procedure 1. Remove the upper intake manifold cover by loosening the four mounting bolts. 2. Remove the vacuum hose from the EGR valve (2).…

Removal Procedure Tools Required J 39083 Glow Plug Connector Remover and Installer Right Side of Vehicle 1. Raise the vehicle. 2. Remove the right front…

Removal Procedure Tools Required J 3 9 0 8 3 G low P l ug Connector Remover and Installer Left Side of Vehicle 1. Remove…

Removal Procedure 1. Remove the negative battery cables. 2. Release the wiring harness connector at the glow plug relay. 3. Remove the glow plug wiring…

Removal Procedure 1. Remove the negative battery cables. 2. Remove the sensor electrical connector. 3. Remove power steering pump. Refer to Power Steering Pump Replacement…

Removal Procedure 1. Remove the fuel manager/filter. Refer to Fuel Manager/Filter Replacement. 2. Disconnect the electrical connector. 3. Remove the switch (1). installation Procedure 1.…

Removal Procedure 1. Remove the protective cover (under hood electrical center). 2. Remove the relay. Installation Procedure 1. Install the relay. 2. Install the protective…

Removal Procedure Tools Required J 29873 Nozzle Socket Important: When removing an injection nozzle, use the J 29873 nozzle socket. Remove the nozzle using the…

Removal Procedure Tools Required J 39664 Manifold Cover Set Important: Clean all the line fittings that will be loosened or removed. 1. Remove the negative…

Tools Required • J 41089 Injection Pump Wrench • J 29872-A Injection Pump Adjustment Tool Important: Do not perform this procedure when only an injection…