[1] – →NOTE: Approximate oil pan capacity is 2.9 L (3.1 qt.). Drain oil. [2] – Remove cap screws (G) from oil pan (D) and…

[1] – Check camshaft end play while camshaft is installed in cylinder block. (See Check Camshaft End Play in Section 220, Group 15.) [2] –…

IMPORTANT: Avoid Damage! Always replace all camshaft followers when installing a new camshaft. The components wear as a set and replacing only one of the…

IMPORTANT: Avoid Damage! Always replace all camshaft followers when installing a new camshaft. The components wear as a set and replacing only one of the…

[1] – Check backlash of timing gears. (See Check Timing Gear Backlash in Section 220, Group 15.) [2] – →NOTE: Rotate crankshaft and align timing…

[1] – Remove alternator. (See Remove and Install Alternator in Section 40, Group 05.) [2] – Remove fan, spacer, and sheave from water pump. [3]…

[1] – Remove engine. (See procedure in this group.) [2] – Remove alternator. (See Remove and Install Alternator in Section 40, Group 05.) [3] –…

[1] – →NOTE: It is not necessary to remove oil seal case to remove oil seal. It is not necessary to remove oil seal to…

[1] – Remove flywheel. (See Remove and Install Flywheel in this group.) [2] – →NOTE: Carefully pry oil seal (A) from oil seal case. [3]…

[1] – Remove flywheel. (See Remove and Install Flywheel in this group.) [2] – Carefully pry oil seal (A) from engine block (B). [3] –…