1. Grip the spiral bevel pinion nut with a torque wrench and measure the turning torque. 2. If the turning torque is not within the…

1. Measure free length of spring with vernier caliper. 2. If the free length is less than the allowable limit, replace.  

1. Place for in the groove to check clearance with feeler gauge. 2. If the clearance exceeds allowable limit, replace.  

1. Secure the gear with a vise. 2. Set a dial indicator (lever type) with its finger on the spline. 3. Move the shaft to…

1. Set a dial indicator (lever type) on one of the tooth faces. 2. Clamp the mating gear. 3. Measure backlash by turning the gear…

1. Hold the inner race, and push and pull the outer race in all directions to check for wear and roughness. 2. Apply transmission fluid…

1. Check the spring (3) and the poppet (4) for scratches, damage and breakage. 2. If anything is unusual, replace it.  

1. Check the plug (1), O-ring (4), the spring (2) and the valve poppet (3) for scratches, damage and breakage. 2. If anything is unusual,…

1. Check the spring (2) and check and high pressure relief valve (3) for scratches and damage. 2. Check the valve seal in the port…

1. Check the piston contact face of the thrust plate (1), and the thrust plate contact face of the swashplate (2) for       …