Notes The engines are provided with different oil pressure relief valves: On engines 61 5.912/913 the oil pressure relief valve is installed in main oil…

Note As a spare part, the oil pump, part No. 115 180 13 01, of engine 115 will be delivered for engines 61 5.91219 13.…

Note The following engines are provided with a thermostat in oil filter: Engine 615 in model 123.1 on vehicles with air conditioning system. Engine 616…

Note The following engines are provided with a thermostat in oil filter: Engine 615 in model 123.1 on vehicles with air conditioning system. Engine 616…

Note When the oil filter is removed, residue from gasket may remain stuck to flange surface of cylinder crankcase. To prevent such residue from entering…

Oil pressure At operating temperature, the oil pressure at idle may drop to 0.5 bar gauge pressure (0.5 atij). During acceleration, the oil pressure should…

A. Model 11 5.1 Removal 1. Remove instrument cluster. 2. Unscrew pull knob and rosette and pull preglow starter switch ( 1 ) into range…

Adjustment 1. Push start and stop control into stop position. 2. Unscrew adjusting screw (6) until steering lock switch is released. Then unscrew by an…

Removal 1. Unscrew all nuts, remove connecting line, connection insulators and conductors. 2. Unscrew glow plugs with box wrench. Installation 3. Prior to installing glow…

1. Filament wire torn (hair crack) Cause: Start of delivery too early or damaged nozzles (dropping, hanging). 2. Filament wire burnt oat or scorched (wire…