Cummins N14 – CELECT Electronic Control Module (ECM) – Removal

Remove the six capscrews which hold the ECM to the cooling plate. These capscrews are metric. Remove the ECM from the cooling plate.

Cummins N14 - CELECT Sensor Harness - Removal
Remove the retaining clamps for the sensor harness from the support bracket and the engine…
Cummins N14 - CELECT Actuator Harness - Removal
Remove the actuator harness clamps from the support bracket. Although the OEM harness is shown,…
Cummins N14 - CELECT Coolant Temperature Sensor Location & Removal
Note: The N14 water temperature sensor is directly connected to the thermostat Remove the coolant…
Cummins N14 - Alternator - Removal
Remove the adjusting link capscrew and the adjusting link. Remove the alternator to alternator support…
Cummins N14 - Turbocharger - Removal
Remove the oil supply and the oil drain tubes from the turbocharger. Remove the four…

Published by samuel