Install the oil pan gasket and the oil pan on the cylinder block. Use your fingers to install and tighten one of the
7/16-inch oil pan mounting capscrews on each side of the oil pan, halfway between the front and the rear of the oil
pan. Use your fingers to install and tighten all the mounting capscrews.
Tighten the four 5/16-inch capscrews in the rear of the oil pan in the sequence shown.
Torque Value: 27 N•m [20 ft-lb]
Tighten the thirty-two (32) 7/16-inch capscrews in the sequence shown.
Torque Value: 68 N•m [50 ft-lb]
