Use solvent to clean the push rods. Dry with compressed air.
Related Posts
- Cummins N14 - Connecting Rod Bearings - Cleaning
Caution: Do not use a scraper or a wire brush. The bearings can be damaged.…
- Cummins N14 - Connecting Rod Assemblies - Cleaning
NOTE: The alpha characters or numbers on the connecting rod cap must be the same…
- Cummins N14 - Camshaft - Cleaning
Warning: When using a steam cleaner, wear protective clothing and safety glasses or a face…
- Cummins N14 - Valve Crosshead - Cleaning
Use solvent to clean the crosshead. Dry with compressed air.
- Cummins N14 - Push Tubes - Removal
Remove the push tubes. NOTE: To prevent increased wear, mark each push tube as it…
