Adjust 3-point hitch links and stabilizers to position draft arms for most efficient attachment operation or to prevent excessive lateral movement. Stabilizers should be adjusted to position left and right draft arms the same distance from the machine centerline for PTO operation.
[1] – Park machine safely.
[2] –
→NOTE:
There are grooves in the threaded shanks that should become visible when they are at the end of their adjustment.
Loosen lock nut (A) and adjust center link length as required to level attachment front to rear.
Rotate center link (B) to lengthen or shorten link. Tighten lock nut.
[3] – Loosen lock nut (C) and turn right side lift link (D) as required to adjust draft arm side to side level. Tighten lock nut.
[4] – Adjust left and right draft arm stabilizers (E) to limit sway when attachments is raised for transport or to center PTO driven attachments. Adjust stabilizers to allow more movement of draft arms for ground engaging attachments requiring greater scope of movement.
a. Remove ring (F) from drilled link.
b. Rotate turnbuckle (G) to adjust angle of draft arm.
c. Reinstall ring to link to secure stabilizer setting.
