KUBOTA – L2501 – ELECTRICAL SYSTEM – CHECKING AND ADJUSTING – ENGINE STARTING AND STOPPING SYSTEM – Starter Motor B Terminal Voltage

1. Measure the voltage across the B terminal and chassis.
2. If the voltage differs from the battery voltage, check the battery’s cable.

KUBOTA - L2501 - ELECTRICAL SYSTEM - CHECKING AND ADJUSTING - ENGINE STARTING AND STOPPING SYSTEM - Connector Voltage
1. Measure the voltage with a voltmeter across the connector B terminal and chassis. 2.…
KUBOTA - L2501 - TRANSMISSION - SERVICING - Pump Shaft and Motor Shaft
1. Check the oil seal surface (3). 2. If the pump shaft (1) and motor…
6.7L Cummins Electrical Equipment - Starter Magnetic Switch - Voltage Check
If the multimeter indicates resistance greater than 100k ohms with the keys witch in the…
KUBOTA - L2501 - ELECTRICAL SYSTEM - CHECKING AND ADJUSTING - BATTERY - Battery Voltage
1. Stop the engine and turn the main switch off. 2. Connect the COM (−)…
6.7L Cummins Electrical Equipment - Starter Solenoid - Voltage Check
Digital Multimeter, Part Number 3377161 Set the digital multimeter, Part Number 3377161, to measure DC…

Published by samuel