1. Lightly lubricate the crankshaft balancer internal hub with engine oil.
2. Install the crankshaft balancer to the crankshaft.
3. Lightly lubricate the crankshaft balancer bolt with engine oil.
NOTE: Refer to Fastener Notice
4. Install the crankshaft balancer bolt and washer.
Tighten: 1. Tighten the bolt to 100 N.m (74 lb it) on the first pass.
2. Tighten the bolt an additional 105 degrees.
5. Remove the J 44643 . See Special Tools .
