2008 6.6L Duramax – CRANKSHAFT BALANCER REMOVAL – Removal

Related Posts

• 2008 6.6L Duramax - OIL PUMP REMOVAL

  1. While holding the secondary oil pump shaft with a hex driver, remove the oil…

• 2008 6.6L Duramax - CRANKSHAFT BALANCER REPLACEMENT - Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (w/Single …

• 2008 6.6L Duramax - CRANKSHAFT BALANCER REPLACEMENT - Installation Procedure

  1. Lubricate the crankshaft balancer internal hub with clean engine oil. 2. Install the crankshaft…

• 2008 6.6L Duramax - Oil Cooler

• 2008 6.6L Duramax - AC Bracket