1. Lubricate the crankshaft balancer internal hub with clean engine oil.
2. Install the crankshaft balancer on the crankshaft.
3. Lubricate the crankshaft balancer bolt with clean engine oil.
NOTE: Refer to Fastener Notice
4. Install the crankshaft balancer bolt and washer.
Tighten: Tighten the bolt to 353 N.m (260 lb ft).
5. Remove J 44643 . See Special Tools .
6 . Position the starter motor.
7. Install the starter motor bolts.
Tighten: Tighten the bolts to 78 N.m (58 lb ft).
8 . Install the right wheelhouse panel. Refer to Front Wheelhouse Liner Replacement – Right Side (GMC) or Front Wheelhouse Liner Replacement – Right Side (Chevrolet) .
9. Install the lower fan shroud. Refer to Engine Coolant Fan Lower Shroud Replacement (Mechanical) .
10. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (w/Single Battery) or Battery Negative Cable Disconnection and Connection (w/Auxilian Battery) or Battery Negative Cable Disconnection and Connection (w/Dual Batteries).
