1. Install the thermostat housing.
NOTE: Refer to Fastener Notice.
2. Install the thermostat housing bolts and nuts.
Tighten: Tighten the thermostat housing bolts and nuts to 25 N.m (18 lb ft).
4. Install the water pump inlet pipe.
5. Install the turbocharger coolant outlet hose and clamps.
6. Install the water pump inlet pipe bolts.
Tighten: Tighten the water pump inlet pipe bolts to 25 N.m (18 lb ft).
7. Install the EGR coolant pipe.
8. Install the EGR coolant pipe bolts.
Tighten: Tighten the EGR coolant pipe bolts to 25 N.m (18 lb ft).
9. Connect the coolant temperature sensor.
12. Install the water outlet.
13. Install the water outlet bolts.
Tighten: Tighten the water outlet bolts to 25 N.m (18 lb it).
14. Install the electrical harness bracket.
15. Install the electrical harness bracket bolt.
Tighten: Tighten the electrical harness bracket bolt to 10 N.m (89 lb in).
17. Install the main electrical harness bracket.
18. Install the main electrical harness bracket bolts.
Tighten: Tighten the main electrical harness bracket bolts to 10 N.m (89 lb in).
19. Connect and install the turbocharger vane position sensor.
20. Connect and install the barometric sensor.
