- Remove the left glow plug harness bracket bolts.
2. Remove the right glow plug harness bracket bolts.
3. Disconnect the positive crankcase ventilation (PCV) hose clamp.
4. Remove the right PCV pipe bolt.
5. Remove the left PCV pipe bolt.
6. Remove the PCV pipe.
7. Disconnect the exhaust gas recirculation (EGR) valve electrical connector.
8. Remove the ground bolt.
9. Disconnect the crankshaft postion sensor electrical connector.
10. Disconnect the fuel pressure control valve electrical connector.
11. Disconnect the oil level sensor electrical herness connector.
12. Disconnect the fuel temperature sensor connector.
13. Disconnect the glow plug controller electrical connector.
14. Disconnect and remove the turbocharger vane position sensor.
15. Disconnect the fuel injector electrical connections.
16. Disconnect the turbocharger vane control solenoid valve.
17. Disconnect the fuel rail pressure sensor.
18. Disconnect the oil pressure sensor electrical connector.
19. Remove the oil level sensor harness bolt.
20. Remove the glow plug controller bolts.
21. Remove the glow plug controller.
22. Remove the glow plug controller shield bolts.
23. Remove the glow plug controller shield.
24. Remove the glow plug controller bracket bolts.
25. Remove the glow plug controller bracket.
26. Remove the left glow plugs.
27. Remove the right glow plugs.
28. Remove the engine wiring harness.
29. Remove the engine harness bracket bolts.
30. Remove the engine harness bracket.
