- Remove the left fuel injector bracket bolts.
2. Remove the right fuel injector bracket bolts.
3. Install the J-46594 into the fuel injector brackets.
4. Pull back on J-46594 in one steady motion, until the fuel injector breaks tree from its seat.
5. Remove the J-46594 .
6. Remove the left fuel injectors with brackets.
7. Remove the right fuel injectors with brackets.
8. Remove the left injector bracket pins.
9. Remove the right injector bracket pins.
10. Remove the copper washer from the injector bore and discard.
11. Remove the O-ring from the injector and discard.
