Home » ISX11.9 CM2250 - Service Manual » Cummins ISX11.9 CM2250 – Service Manual 000-007   Engine Painting

Cummins ISX11.9 CM2250 – Service Manual 000-007   Engine Painting

Table of Contents

General Information

General Information

TOC

Remove all belts from the engine.

Cover the following parts of the engine:

  • Exhaust and intake openings
  • Electrical components
  • Fuel inlet and drain connections
  • Any exposed fittings, threads and electrical wire terminals.

SMALL | MEDIUM | LARGE


 WARNING 

When using a steam cleaner, wear protective clothing and safety glasses or a face shield. Hot steam will cause serious personal injury.
 WARNING 

Wear appropriate eye and face protection when using compressed air. Flying debris and dirt can cause personal injury.
 CAUTION 

Avoid prolonged, direct steam or water spray on electrical components.

Use steam to clean the engine.

Dry with compressed air.

NOTE: Make sure all engine surfaces are clean and dry before painting the engine.

SMALL | MEDIUM | LARGE
   


After cleaning the engine, cover the following components to protect them from the paint:

  • All dataplates
  • Valve and injector set marks
  • Exhaust manifold
  • Turbocharger turbine housing
  • Flywheel
  • Flywheel housing transmission mounting surface
  • Electrical connections
  • All decals
  • All pulley belt surfaces
  • Any exposed fittings, threads, and electrical wire terminals.

SMALL | MEDIUM | LARGE
   


Paint the engine.

 
SMALL | MEDIUM | LARGE
Last Modified:  04-May-2010