Home » ISX11.9 CM2250 - Service Manual » Cummins ISX11.9 CM2250 – Service Manual 007-065   Lubricating Oil Fill Tube

Cummins ISX11.9 CM2250 – Service Manual 007-065   Lubricating Oil Fill Tube

Remove

TOC

 CAUTION 

Removal of the oil fill tube without loosening the tube brace capscrew is likely to cause fill tube thread breakage.

The oil fill location is located on the side of the engine. Refer to the OEM service manual for the exact oil fill tube location.

Loosen the tube brace capscrew.

Remove the tube brace capscrew from the cylinder block (2).

SMALL | MEDIUM | LARGE


Remove the oil fill tube (1) and the tube brace (2) from the oil fill tube connection (3).

SMALL | MEDIUM | LARGE
   


Loosen the capscrews holding the oil fill tube connection to the engine block.

SMALL | MEDIUM | LARGE
   


Remove the ring seals from the oil fill connection, oil fill tube, and oil fill tube cap.

Discard the ring seals.

Ring Seals

    Ring Seals

  1. Oil fill connection ring seal
  2. Oil fill tube ring seal
  3. Oil fill cap ring seal.

SMALL | MEDIUM | LARGE
   

Clean and Inspect for Reuse

TOC

Clean the block interface seal surface.

SMALL | MEDIUM | LARGE
   


Inspect the oil fill tube and fill tube threads for cracks or other damage.

Inspect the oil fill tube sealing surfaces for cracks or other damage.

SMALL | MEDIUM | LARGE
   

Install

TOC

Install a new oil fill connection ring seal.

Use clean engine oil to lubricate the oil fill connection ring seal.

SMALL | MEDIUM | LARGE
   


Install the oil fill connection to the block interface.

SMALL | MEDIUM | LARGE
   


Install the new ring seals on the bottom of the oil fill tube (1) and on the oil fill tube cap (2).

SMALL | MEDIUM | LARGE
   


Install the oil fill tube cap and the oil fill tube.

SMALL | MEDIUM | LARGE
   


Install and tighten the tube brace gear cover capscrew (2).

Torque Value:  28  n.m  [248 in-lb]

Tighten the tube brace capscrew (1).

SMALL | MEDIUM | LARGE
Last Modified:  03-Aug-2010