Cummins ISX11.9 CM2250 – Service Manual 011-069   Rear EGR Connection Tube

Before installing the V-band clamp, coat the clamping surface with high temperature anti-seize compound.

Remove the protective caps used from the Air Handling Clean Care Kit from the connection points.

Apply lubricant to the EGR hose inlet and the hose end of the rear EGR connection tube.

Assemble the hose clamp over the inlet side of the hose.

Slide the rear EGR connection tube into the EGR hose.

Install a new gasket onto the pilot of the EGR cooler gas outlet.

Align the rear EGR connection tube with the EGR cooler gas outlet and loosely install the V-band clamp.

Tighten the V-band clamp.

Tighten the hose clamp.