Cylinder Block
|
TOC |
| Tool Number
ST-647 |
Standard Puller
Used to remove the alternator drive pulley. Use with two 5/16 x 18 x 2 inch capscrews.
|
|
| Tool Number
ST-762 |
Piston Ring Expander
Used to remove and install piston rings on pistons.
|
|
| Tool Number
ST-1178 |
Main Bearing Cap Puller
Used to remove main bearing caps.
|
|
| Tool Number
2892174 |
Timing Pin Kit
Used for static timing of the engine. Contains camshaft timing pin, Part Number 4919342, and crankshaft timing pin, Part Number 2892115.
|
|
| Tool Number
3163745 |
Universal Cylinder Liner Puller
Used to remove cylinder liners from cylinder block.
|
|
| Tool Number
3376326 |
Pulley Installation Tool
Used to install drive pulleys. Use pulley pusher adapter, Part Number 3377401, to install the alternator drive pulley.
|
|
| Tool Number
3376695 |
Guide Pin Kit
Used to aid the installation of the vibration damper. The kit consists of two each guide pins, Part Numbers 3376488, 3376638, 3376696, 3376697, and 3376698.
|
|
| Tool Number
3823495 |
Gauge Block
Measure cylinder protrusion on the cylinder block and gear housing protrusion below the cylinder block.
|
|
| Tool Number
4919438 |
Camshaft Guide Pilot
Used to aid the removal and installation of the camshaft.
|
|
| Tool Number
4919258 |
Hydraulic Actuator Kit
Used with the installation and removal kit, Part Number 4919259.
|
|
| Tool Number
4919259 |
Camshaft Bushing Installation and Removal Kit
Used to remove and install camshaft bushings.
|
|
| Tool Number
4919273 |
Piston Ring Compressor
Used to compress piston rings on pistons during installation of pistons in the cylinder block.
|
|
| Tool Number
3164246 |
Liner/Installation Tool
Used to seat and hold the liner while liner protrusion is measured.
|
|
| Tool Number
4919610 |
Camshaft Gear Puller Kit
Used to remove the camshaft gear from the camshaft without removing the camshaft from the engine.
|
|
| Tool Number
4918991 |
Crankshaft Seal Remover
Used to remove and install the front crankshaft oil seal.
|
|
|
Last Modified: 27-Jan-2011
