1. If removed, position the rear transmission mount bracket (2), install the retaining bolts (1) and tighten to 68 N.m (50 ft. lbs.).
2. Position the rear transmission mount isolator (3) to the rear transmission mount bracket (2),
install the retaining bolts (1) and tighten to 33 N.m (24 ft. lbs.).
3. Position the transmission crossmember (4), install the retaining bolts (1, 3) finger tight.
4. Install the rear transmission mount isolator retaining bolts (2) finger tight.
5. Tighten the transmission crossmember retaining bolts (1, 3) to 68 N.m (50 ft. lbs.).
6. Lower the transmission and remove the jack.
7. Tighten the rear transmission mount isolator retaining bolts (2) to 47 N.m (35 ft. lbs.).