1. Position the rear transmission mount isolator (2), install the retaining bolts (1) and tighten to 68 N.m (50 ft. lbs.).
2. Position the rear cross member, install the retaining bolts (2) finger tight.
3. Install the rear transmission mount isolator nuts (1) finger tight.
4. Tighten the transmission crossmember retaining bolts (2) to 68 N.m (50 ft. lbs.).
5. Lower the transmission and remove the jack.
6. Tighten the rear transmission mount isolator retaining nuts (1) to 47 N.m (35 ft. lbs.).
