1. Remove the fan blade, clutch and shroud. See COOLING FAN BLADE, CLUTCH & SHROUD. Raise and support the vehicle. Remove the degas drain hose and the lower radiator hose from the radiator.
2. Place a suitable drain pan under transmission oil cooler lines. Disconnect the transmission cooler lines at the bottom of the radiator. Lower the vehicle. Remove the plastic pin-type retainers and position the radiator sight shield out of the way.
3. Remove the right upper radiator support bolts and the right upper radiator support. See Fig. 9. Remove the radiator insulator. See Fig. 38. Remove the vent hose from the radiator.
Remove the bolts and the left side radiator support. Remove the radiator insulator.
4. Remove the radiator and the lower insulators from the radiator or frame extension. To install, reverse the removal procedure. See TORQUE SPECIFICATIONS.