KUBOTA – L2501 – TRANSMISSION – PREPARATION – PTO Cable and Fender Support

1. Disconnect the PTO wire (1).
2. Remove the fender supports (2) and the fender stay (3).

KUBOTA - L2501 - TRANSMISSION - PREPARATION - ROPS and Fender
1. Place the disassembling stand under the mid case and the transmission case. 2. Remove…
KUBOTA - L2501 - TRANSMISSION - PREPARATION - ROPS and Fender
1. Place the disassembling stand under the mid case and the transmission case. 2. Remove…
KUBOTA - L2501 - TRANSMISSION - PREPARATION - Draining the Transmission Fluid
1. Remove the drain plugs (1) at the bottom of the transmission case and drain…
KUBOTA - L2501 - TRANSMISSION - PTO SYSTEM - Structure
PTO is "ENGAGED" or "DISENGAGED" by operating the shift lever of the PTO shifter. The…
KUBOTA - L2501 - TRANSMISSION - PREPARATION - Electrical Wiring
1. Disconnect the 2P connectors (1). 2. Disconnect the ground cable (2). 3. Remove the…

Published by samuel