KUBOTA – L2501 – TRANSMISSION – DISASSEMBLING AND ASSEMBLING – Bearing and Differential Lock Shifter

1. Secure the differential gear in a vise.
2. Remove the ball bearing with a puller.
3. Remove the differential lock shifter.

KUBOTA - L2501 - TRANSMISSION - DISASSEMBLING AND ASSEMBLING - Differential Lock
1. Remove the clevis pin (1). 2. Draw out the differential lock fork shaft (2).…
KUBOTA - L2501 - TRANSMISSION - DISASSEMBLING AND ASSEMBLING - Differential Gear Assembly
1. Remove the differential bearing case (1) mounting screws. 2. Remove the differential bearing case…
KUBOTA - L2501 - CLUTCH - Release Bearing
1. Check for abnormal wear on contact surface. 2. Rotate bearing outer race, while applying…
KUBOTA - L2501 - ENGINE - Timing Gear Backlash
1. Set a dial indicator (lever type) with its tip on the gear tooth. 2.…
KUBOTA - L2501 - ENGINE - Idle Gear Side Clearance
1. Set a dial indicator with its tip on the idle gear. 2. Measure the…

Published by samuel