KUBOTA – L2501 – ELECTRICAL SYSTEM – CHECKING AND ADJUSTING – ENGINE STARTING AND STOPPING SYSTEM – Checking Connector Voltage

1. Turn the main switch OFF. Measure the voltage between the terminal B (1) and the chassis.
2. Turn the main switch ON. Measure the voltage between the terminal IG (3) and the chassis.

KUBOTA - L2501 - ELECTRICAL SYSTEM - CHECKING AND ADJUSTING - ENGINE STARTING AND STOPPING SYSTEM - Connector Voltage
1. Measure the voltage with a voltmeter across the connector B terminal and chassis. 2.…
KUBOTA - L2501 - ELECTRICAL SYSTEM - CHECKING AND ADJUSTING - ENGINE STARTING AND STOPPING SYSTEM - Checking Alternator
1. Disconnect the 2P connector (3) from alternator (2) after turning the main switch OFF.…
KUBOTA - L2501 - ELECTRICAL SYSTEM - CHECKING AND ADJUSTING - ENGINE STARTING AND STOPPING SYSTEM - Checking Seat Switch
1. Remove the seat. 2. Disconnect the seat switch connector (3). 3. Change the sensor…
KUBOTA - L2501 - ELECTRICAL SYSTEM - CHECKING AND ADJUSTING - ENGINE STARTING AND STOPPING SYSTEM - Checking OPC Timer
1. Remove the timer. (OPC timer is located behind the panel.) 2. Connect jumper leads…
KUBOTA - L2501 - ELECTRICAL SYSTEM - CHECKING AND ADJUSTING - ENGINE STARTING AND STOPPING SYSTEM - Connector Voltage
1. Disconnect the 2P connector from engine stop solenoid. 2. Turn the main switch to…

Related Posts

Published by samuel