KUBOTA – L2501 – ELECTRICAL SYSTEM – CHECKING AND ADJUSTING – ENGINE STARTING AND STOPPING SYSTEM – Checking Ground Cable

Related Posts

• KUBOTA - L2501 - ELECTRICAL SYSTEM - CHECKING AND ADJUSTING - ENGINE STARTING AND STOPPING SYSTEM - Checking Alternator

  1. Disconnect the 2P connector (3) from alternator (2) after turning the main switch OFF.…

• KUBOTA - L2501 - TRANSMISSION - SERVICING - Checking Bearing

  1. Hold the inner race, and push and pull the outer race in all directions…

• KUBOTA - L2501 - TRANSMISSION - CHECKING AND ADJUSTING - Checking Cruise Lever Operating Force (Option)

  1. Push the cruise control lever (1) into maximum tied position. After that pull it…

• KUBOTA - L2501 - TRANSMISSION - CHECKING AND ADJUSTING - Adjusting Neutral

  1. Disengage the front wheel drive lever. (Drive only rear wheels.) 2. Set the cruise…

• KUBOTA - L2501 - ELECTRICAL SYSTEM - CHECKING AND ADJUSTING - ENGINE STARTING AND STOPPING SYSTEM - Checking Fuse

  1. Check the fuse. 2. If any of the fuses is blown, replace it with…