Cummins N14 – Lubricating Oil Pump Signal Line – Installation

On CELECT™engines, install theDFCsignal line. Tighten the signal line tube nuts.
Torque Value: 14 N•m [120 in-lb]

Cummins N14 - Lubricating Oil Pump - Installation
Install a new gasket on the mounting trunion of the lubricating oil pump. Install the…
Cummins N14 - Lubricating Oil Pump Signal Line - Removal
Remove the demand flow and cooling (DFC) signal line between the cylinder block main oil…
Cummins N14 - Fuel Crossovers - Installation
Use new o-rings, and install the two fuel crossover connections and the two cover plates.…
Cummins N14 - Engine Brake - Installation
Install two guide pins into each rocker lever housing. Install new C-Brake housing gaskets and…
Cummins N14 - Valve Crossheads - Installation
Install the valve crossheads in their original location and orientation. Lubricate the valve stems with…

Published by samuel