Engine Testing
|
TOC |
| Tool Number
ST-1111-3 |
Manometer
Used to measure blowby and intake air restriction.
|
|
| Tool Number
3162871 |
Engine Lifting Fixture
Used to lift the engine.
|
|
| Tool Number
3163890 |
Engine Control
Used when testing an engine on a dynamometer. It is designed to replace the throttle pedal, operator interface panel, and fault code monitoring circuits.
|
|
| Tool Number
3164242 |
Engine Control Harness
Used to connect the engine to an Engine Control Module (ECM). Used only when the engine is being tested on an engine dynamometer.
|
|
| Tool Number
3376375 |
Fuel Measuring Device
Used to measure the rate of fuel consumption of a Cummins® diesel engine.
|
|
| Tool Number
3377161 |
Digital Multimeter
Used to measure pressures, vacuums, and temperatures.
|
|
| Tool Number
3822567 |
Blowby Tool – 0.354 Inch Orifice
Used with manometer, Part Number ST-1111-3, to check engine crankcase blowby.
|
|
| Tool Number
3822995 |
Pressure Gauge, 0-60 PSI
Used to measure coolant pressure.
|
|
| Tool Number
3823978 |
Dyno-Room Charge-Air Cooler
Used to cool intake air when an air-to-air engine is run on an engine dynomometer.
|
|
| Tool Number
3824963 |
Thermocouple Module
This module converts the digital multimeter into a thermometer via standard banana plugs.
|
|
| Tool Number
3824965 |
Temperature Immersion Probe
Used with a multimeter to measure fluid temperature.
|
|
|
Last Modified: 06-Jul-2010
