Fuel System
|
TOC |
| Tool Number
3164488 |
Digital Multimeter
Used to measure electrical circuits: voltage (volts), resistance (ohms), and current (amperes).
|
|
| Tool Number
3164491 |
Pressure and Vaccum Module
Used with multimeter, Part Number 3164488, to measure pressures and restriction in the fuel system.
|
|
| Tool Number
3164618 |
12 mm Banjo Adapter Fitting (Leakage Flow Adapter)
Used to isolate drain flow from the fuel drain lines where they connect with a 12 mm banjo screw.
|
|
| Tool Number
3164621 |
Fuel Line with 1.09 mm [0.043 in] Orifice
Used to create rated fuel flows through the low-pressure fuel system without loading the engine.
|
|
| Tool Number
3824510 |
QD™ Contact Cleaner
Use this non-petroleum cleaner to clean electrical connections and fuel pump internal parts.
|
|
| Tool Number
4919057 |
16 mm Banjo Connector Fitting
A banjo-style pressure gauge adapter that can be used to measure pressure or vacuum at any point in the low-pressure fuel system where a 16 mm banjo bolt exists at a fuel line.
|
|
| Tool Number
4919073 |
Fuel System Clean Care Kit
Used to cap or plug the fuel system fittings during service to prevent debris from entering the fuel system.
|
|
| Tool Number
4919654 |
Fuel Pump Gear Replacer Kit
Used to hold the fuel pump and prevent the fuel pump camshaft from rotating while installing or removing the fuel pump gear.
|
|
|
Last Modified: 11-Jun-2010
