Remove and discard the three injector o-rings.
Related Posts
- Cummins N14 - Rear Cover - Cleaning and Inspection
Use a mandrel or drift to remove the crankshaft oil seal.
- Cummins N14 - Rocker Lever - Cleaning and Inspection
Use steam or solvent to clean the rocker lever shaft. Dry with compressed air. Visually…
- Cummins N14 - Cylinder Block - Cleaning and Inspection - Camshaft Bore - Cleaning
Use a fine emery cloth to remove burrs, and clean the bushing bores.
- Cummins N14 - Camshaft - Cleaning
Warning: When using a steam cleaner, wear protective clothing and safety glasses or a face…
- Cummins N14 - Push Rod - Cleaning
Use solvent to clean the push rods. Dry with compressed air.
