The turbocharger is used to increase the amount of air that enters the engine’s cylinders. This increase allows a proportional increase in fuel to be…
Author: samuel
Remove or Disconnect (Figures 3, 4, and 5) • Make sure the engine control switch is off. 1. Drive belt. (Vehicles with Air Conditioning) 2.…
Remove or Disconnect (Figures 4, 5, 8, 9, 11, 15, 17, 10, 24 and 25) • Raise the vehicle. 1. Fasteners at the front and…
Remove or Disconnect (Figures 3, 7, 13, 19, 21 and 27) • Raise the vehicle. 1. Clamps at the front and rear of the three-way…
Remove or Disconnect (Figures 2, 12 and 16) • Raise the vehicle. • Support intermediate exhaust pipe. 1. Oxygen sensor electrical connection (if equipped). 2.…
When installing a new exhaust pipe, or muffler, or tailpipe, on any model, check for proper alignment. Rattles and noise vibrations in the exhaust system…
CAUTION: Always wear protective goggles and gloves when removing exhaust parts as falling rust and sharp edges from worn exhaust components could result in serious…
Inspect exhaust pipes, catalytic converters (if equipped), mufflers, and tailpipes for cracked joints, broken welds, and corrosion damage that could result in a leaking exhaust…
1. Connect one end of the manometer to the engine oil dipstick hole. The other end of the manometer is vented to atmosphere. 2. Install…