1. Install the drive belt tensioner. Align the pin with the hole in the generator bracket. 2. Install the drive belt tensioner bolt. Tighten: Tighten…

1. Remove the drive belt. Refer to Drive Belt Replacement. 2. Remove the drive belt tensioner bolt. 3. Remove the drive belt tensioner.

1. Install the drive belt, if equipped with dual generators. 2. Route the drive belt over and/or around all the drive pulleys except for the…

1. Remove the upper fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement (Mechanical) or Engine          Coolant Fan Upper Shroud…

• Special tools are listed and illustrated throughout this section with a complete listing at the end o f the section.         …

Sealant Types IMPORTANT: The correct sealant and amount of sealant must be used in the proper location to prevent oil leaks, coolant leaks, or the…

Gasket Reuse and Applying Sealant • Do not reuse any gasket unless specified. • Gaskets that can be reused will be identified in the service…

IMPORTANT: Many internal engine components will develop specific wear patterns on their friction surfaces. When disassembling the engine, internal components MUST be separated, marked, or…

An automobile engine is a combination o f many o f the following surfaces: • Machined • Honed • Polished • Lapped The tolerances o…