If removed, install the oil suction tube. Refer to Procedure 007-035 in Section 7. For front gear train engines, apply a 2 mm [1116 in]…

NOTE: The use of air or power tools, such as a high speed sander with an abrasive pad, to clean the gasket material can overheat…

Oil Pan, Suspended NOTE: A suspended oil pan consists of the oil pan, mounting flange, and a flexible gasket. Remove the oil pan mounting capscrews,…

A front sump (1), rear sump (2), or center sump (3) lubricating oil pan can be used, depending on the application. The mounting of the…

Install a new a-ring in the groove on the underside of the filter head cover. Install a small a-ring in the groove on the other…

Use solvent to clean the parts. Dry with compressed air. Inspect the sealing surfaces for signs of leakage or burrs. Use a fine crocus cloth…

Make a mark on the lubricating oil filter head adapter and the lubricating oil cooler housing to align the filter head adapter during installation. Remove…

The following procedure is for engines with a remote mounted oil filter option. The mounting location of the oil filter will vary by application. Refer…

Use clean 15W-40 oil to coat the gasket surface of the filter. Fill the filter with clean 15W-40 oil. NOTE: Be careful that no debris…

Clean the area around the lubricating oil filter head. Use the oil filter wrench, Part Number 3400158, to remove the filter. Clean the sealing surface…