Install the heater element. Torque Value: 80 N•m [ 59 ft-lb ] Connect the oil heater electrical cord.

Perform a resistance test on the engine lubricating oil heater element. The readings must be a minimum of 91 ohms to a maximum 101 ohms.…

Clean the heater element with a dry, clean towel. Check for cracks in the heating element.  

Disconnect the oil heater electrical cord. Remove the heater element.  

Front Gear Train Install and tighten the fuel rail supply line at the fuel pump and the fuel rail. Torque Value: 40 N•m [ 30…

Inspect the high-pressure fuel rail supply line ferrules for any sign of burrs, or foreign material, rounding, or cracking. Replace if necessary. Check for cracks,…

Front Gear Train NOTE: A counter-torque must be applied to the fitting on the high-pressure pump. This is to prevent the fitting from being loosened,…

Inspect the high-pressure supply lines for cracks, chafe, leaks, and loose or broken brackets. NOTE: Make sure the fuel line is not rubbing on any…

The fuel rail supply line connects the fuel pump to the fuel rail.  

Inspect and clean the sealing surface between the rail and the fuel pressure relief valve. Install the fuel pressure relief valve and tighten. NOTE: Over-tightening…